This version of is not compatible.

Non-compatible browsers, in addition to preventing you from using all of the webpage’s features, are slower and present security risks.

We recommend that you update your version of your browser now, or that you access the page using another compatible browser .

Go to content
  • CAT
  • EN
  • ES

Endesa - Electricity, Gas, People

Decoding your home’s electrical panel

Publicado el (EN) 1 Diciembre 2017
Descifrando el cuadro eléctrico de casa

Knowing the exact function of each switch on the electrical panel will help you to figure out the cause each time the electricity cuts out, and thus avoid greater problems.

It is the control panel for your home’s electricity, and is usually close to the door. We’re going to decode the mysteries of this device, upon which all of your electricity depends.

Although we colloquially call it the electrical panel, its technical name is the General Control and Safety Panel. Its precise functions are to control electrical installations and to protect both people and the devices that are connected to the network.

The different parts of the electrical panel

  • PCS (Power Control Switch)

    If the electrical panel had a boss, this would be the PCS, or Power Control Switch. It is placed in the first position inside the electrical panel, before the Automatic General Switch (AGS), which we’ll find out more about later on.

    The PCS is in charge of cutting the electrical supply upon command More power than has been ordered, or in cases of overload or short-circuit, in order to avoid damages to the installation.

    If you have questions about how much power you need, use our power calculator.

    In some cases, the PCS is separated from the rest of the switches, with its own cap and seal (in the case of an old panel without a remote-controlled management system). This is so that it is not handled, replaced or bridged, given that any of these actions would mean defrauding the system. In new meters, the PCS is integrated into the panel itself, so it’s not necessary to take measures to prevent it from being handled.

    It checks the power you have ordered, and increases it if the PCS often shuts off
  • AGS (Automatic General Switch)

    The Automatic General Switch is an element only present in recently-installed electrical panels. If your electrical panel is old, you will not find one inside it. Its function is to cut off the electricity for the entire building in the event of a short circuit or a power overload, whether due to a large number of domestic appliances turned on or because of a short circuit.

    The AGS monitors that the installation’s maximum limit is not exceeded. You could have ordered 10 kW of power, but if your installation is not equipped to handle more than 6 kW, it will serve no purpose, given that the AGS will shut off when those 6 kW are exceeded.

    Do not turn on too many domestic appliances at the same time, and try not to purchase apparatuses with a high energy qualification
  • SP (Surge Protector)

    This is another item that is obligatory in newly installed electrical panels in order to enhance safety. The surge protector, as its name indicates, protects the home’s electrical apparatuses from being damaged by power surges regardless of their nature.

    These voltage peaks may be caused, for example, if lightning strikes during a storm, and may cause damage to the equipment, to the installation and even to people. In the event of a surge, the SP will act as a shield deviating the current to the earth connection, thus avoiding damage to electrical appliances.
  • DS (Differential Switch)

    The Differential Switch is different from the others. It is easily recognised because it has a swivel lever with it, more commonly called a lock screw. This element protects the installation against current leakages, preventing a “spark” (or something worse still) if we touch a domestic appliance with a loose cable. That’s why, if at any time, the DS shuts off, it’s because a current leakage occurred due to an anomaly in the installation or a defective domestic appliance.

    As a general rule, there tends to be a differential for each electrical installation, but depending on the size of the property, there may be two or three to control the different areas of the premises.
  • SPS (Small Power Switches)

    These switches separately control the supplying of electricity to different domestic appliances and electric circuits: washing machines, lighting, refrigerators, outlets, etc. They are always together. They are inseparable, like good siblings, and if they detect an excess consumptionin one part of the home, the switch concerned disconnects automatically. Thus, only that area is left without electricity, and not the rest of the property.

    Like the PCS and AGS, they are magneto-thermal circuit breakers and serve to cut off the electricity manually or automatically, and independently of the apparatuses that depend on them in the event of shortcircuiting or overloading.

    SPSs are also useful for construction or maintenance tasks, giving the opportunity to deprive a certain part of the installation of electricity without having to disconnect the entire supply.

    CKeep the labels that indicate the circuit or domestic appliance that is controlled by each switch. If they come loose, replace them with new ones

What does the electrical panel do for us?

As you’ve discovered, all switches, except for the differential, serve to cut off the supply manually or automatically if excessive consumption is recorded.

In this way, when you're without light, the first thing you should do is check your electrical panel. Depending on the switch that was shut off, you’ll be able to discover the problem, and therefore, its solution. For example, if the PCS has shut off, you’ll know that it was because of too much energy being consumed at the same time. If it is an SPS, it will allow you to know the exact area where the incident occurred.

However, if the DS has turned off, you can be sure that it is because of a shortcircuit caused by an apparatus in poor condition or a problem in the electrical installation.

To detect that it has shortcircuited, you can adjust the SPSs to discover the area. Once this has been done, connect one apparatus to another until you see which one needs to be shut off at the Differential. Later, test another domestic appliance on this socket to find out if the problem is due to the device or the socket itself. As you've seen, the electrical panel is an element that seems complicated, but isn't as complicated as it seems. In addition, it will be very useful to you from now on, given that operating it is very simple and intuitive.